How to upgrade IP video door station- 87202S-K

Please note that the following tutorials are only for specific models 87202S-K. For other models, please contact your sales.

Reset outdoor station firstly: #666666# - restore- press# to confirm then outdoor station will reboot.

1.Open the computer's network and sharing center and modify the computer's IP address. The first three segments of the computer's IP address must be consistent with the IP address of the outdoor station（192.168.255.3）,the fourth segment needs to be set to any one of 2-254 but not the same as the outdoor station.

2. Put the upgrade program "image.dd" and "NetCfg.dat" in the root directory of the PC tool

3.Click FileClient (X3).exe to run

4.Enter the IP address and device name of the corresponding model in the terminal IP address

Note:the IP address of the outdoor station is :192.168.255.3（you can check the ip address on the outside unit system information）

Device name:87202S- K

5.click "Device Check" , and then click "Update Software" when it prompts "Device Verification Success" and wait for the device to be upgraded.

1)It will take a few seconds to upgrade the outside unit, please do not close the window while waiting.

2) Whether the outside unit upgrade is successful or not depends on the prompt of the outside. After the upgrade is completed, the outdoor station will automatically restart.

3) When prompted "device verification failed", please check whether the IP address and device name are correct, and verify again after modification

6. After the device upgrade is successful, click "Device Check" again, when prompted "Device Verification Successful", click "Update netcfg" and wait for the device to upgrade.

7.The upgrade is complete after the device restarts.